Z-Max Fender Flares
These ZJ fender flares are a Notch above the rest. The Z-Max Fender Flares will give your ZJ tons of tire clearance and look great, too. Here are some of the reasons you’re going to love them:
- Durable 3/16″ fiberglass construction – hand laid with woven reinforcement.
- Arrives paint-ready (you’re not stuck with just black!)
- All hardware included
- Bolts are pre-attached to flare with fiberglass reinforced body filler
- Detailed instructions for installation
So far, our Z-Max Fender Flares are our best seller! And it’s not hard to see why. People will do a double-take when they see your ZJ Grand Cherokee sporting these. ZJ fender flares are hard to come by anyway, but these have the added benefit of being drool-worthy. A nice, clean, almost stock look, but beefier. Z-Max Fender Flares give your Jeep about as much tire clearance as you can get, without having to lift your vehicle higher than you (or your wallet) really want. Keep your center of gravity low, and open up your wheel well with these flares.
But it’s not all just about looks. We wouldn’t make a product if we thought it wouldn’t hold up to all of the good time offroading you’re going to do. All our Max Clearance Fender Flares are made of 1/4″ hand laid fiberglass with woven reinforcement. Wait, fiberglass? Yes. Won’t that crack? We’d like to see you try! Check out our torture test video to the right, called “Just How Tough?” We drove over these flares, pounded on them with a sledge hammer, and even rode them down a flight of stairs. Nope, no cracks. We did it for you, so you don’t have to. These ZJ flares are seriously tough.
If you wanted to, you could spend a little more money on plastic fender flares that don’t hold up as well, don’t give you as much clearance, and don’t look as clean… but why would you?
|Dimensions||28.5 x 8.5 x 48 in|
10mm wrench (recommended: ratcheting end wrench) Pliers Phillips Screwdriver Permanent marker and/or small right-angle pick Razor blade/box cutter Drill & bits (recommended: step-up drill bit) Safety glasses Angle grinder and/or reciprocating saw Grinding wheel, or metal file Hammer Wood or metal block (for pounding a 90° angle)
Sanding block or electric sander Body filler Waterproof caulking, or metal filler Masking tape Spray can of rubberized undercoating